Precautions of non woven fabric slitting machine

Non woven fabric slitting machine note

1) installation location, height, must meet the design requirements of the import and export orientation, should be firmly screwed tight.

2) all kinds of manual valve pipe insulation installed in the handle are not down.

3) valve must be installed prior to visual inspection, the valve plate should be consistent with the provisions of GB 12220 existing national standards, “universal valve logo”. The strength and sealing test should be carried out before the installation of the valve which is more than 1 MPa and the valve is cut off on the main pipe. In strength test, the test pressure is 1.5 times of the nominal pressure, and the duration is not less than 5min. The valve shell and packing should be qualified without leakage. During the sealing test, the test pressure is 1.1 times the nominal pressure. The duration of the test pressure should be in line with the JB/T 9092 standard, and the valve sealing surface is no leakage.

4) between the valve flange and pipe flange design by piping installed gasket.

5) non-woven belt drive mechanism of the cutting machine, according to product instructions for the installation.

Features: (1) the fluid resistance is small, and the full diameter ball valve has no flow resistance. (2) the structure is simple, the volume is small, and the weight is light. (3) closely dependable. It has two sealing surfaces, and the sealing surface material of the ball valve is widely used in all kinds of plastics at present. It is well sealed and can be fully sealed. It has also been widely used in the vacuum system. (4) has the advantages of convenient operation, open and close rapidly, from fully open to fully closed as long as 90 degree rotation, facilitate remote control.

Warp Beam Carrier

Warp Beam Carrier
This trolley is designed for lifting and transporting of warp beam of different length and weight. Lifting and lowering movements take place from the ground floor, so that the beam can be fittedon the weaving machine very conveniently. This warp beam is generally lifted at tube.

Technical Details Scope of Supply
Equipment Model No. VM 502
Application To load, Transport & unload of Empty Beam of Full Beam or Cloth Roll or Batch up Roll
Beam Flange Dia. 800 mm / 1000 mm / 1100 mm / 1250 mm / 1400 mm
Maximum Barrel Dia. 100 mm / 150 mm / 175 mm / 216 mm / 250 mm
Maximum Barrel Length 2000 mm / 2600 mm / 3200 mm / 3600 mm / 4200 mm / 4600 mm
Beam Lifting Operation Beam lifting / Lowering through Hydraulic operated Foot Pump(with High and Low Pressure Pump Facility)
Transportation Manually Push – Pull
Maximum Beam Weight Capacity 750 kgs. / 1000 kgs. / 1500 kgs. / 2000 kgs. / 2500 kgs.
Steering Handle Both side handle provided on equipment which is positively coupled with each other through worm gear
Front Wheel 50 mm x 150 mm – 2 nos. of Swivel Castor with Cast Nylon wheel complete with metal hub bearing and thread protection disc provided (in case of wider width equipment 40 x 150 mm – 4 nos. wheel are used)
Back Wheel / Drive Wheel 50 mm x 200 mm – 2 nos. of Swivel Castor with Cast Nylong wheel complete with metal hub bearing and thread protection disc provided (in case of wider width equipment 40 x 200 mm – 4 nos. wheel are used.)
Structure Heavy duty M.S. Pipe structure with M.S. Fabricated beam lifting arm provided
Lifting Arm Type Arm Type, beam to be lifted from barrel dia.

Highlights of the Global Fabric Folding Machines report:

  1. A complete backdrop analysis, which includes an assessment of the parent market
  2. An objective assessment of the trajectory of the market
  3. Market segmentation up to the second or third level
  4. Reporting and evaluation of recent industry developments
  5. Important changes in market dynamics
  6. Emerging niche segments and regional markets
  7. Historical, current, and projected size of the market from the standpoint of both value and volume
  8. Market shares and strategies of key players
  9. Recommendations to companies for strengthening their foothold in the market

(Get your FREE Sample Report from::

About Fabric Winding Machine

Fabric winding machine is the main equipment of filament winding technology. The design and performance of filament winding products are realized by winding machine.

According to the control Fabric winding machine can be divided into mechanical winding machine, digital control winding machine, computer control winding machine and computer numerical control winding machine, which in fact is the winding machine development of the four stages.

At present, the most commonly used is the mechanical and computer numerical control winding machine, PLC control, set a variety of packaging methods in one, according to their own needs of the package, choose the standard package, single package or enhance packaging methods

Fabric winding machine is the main equipment of fiber winding process, usually by the fuselage, transmission and control system and other components. Auxiliary equipment, including dipped devices, tension control system, creel, core heater, pre-heater and curing equipment such as yarn.

Brief introduction of fabric measuring machine

Brief introduction of fabric measuring machine

1. Multi function : cloth rolling ,cloth measuring ,cloth inspecting .
2,Adjustable Speed: selection of the governor, flexible cloth speed control;
3,Accurate measurement of length: It equipment with a note yards (meters), It can accurate measure the length of the cloth;
4,Flexible and easy to operate
5,Stable and durable: the rational design of the structure, using high-quality components, durable
6. Working width :1800-2600mm .
We can product the working width according to the customer request .
This machine is suitable for wool, yarn, silk, printing and dyeing, knitting, cotton or other fabric semi-finished or finished playing volume.