Warp Beam Carrier
This trolley is designed for lifting and transporting of warp beam of different length and weight. Lifting and lowering movements take place from the ground floor, so that the beam can be fittedon the weaving machine very conveniently. This warp beam is generally lifted at tube.
| Technical Details | Scope of Supply |
| Equipment Model No. | VM 502 |
| Application | To load, Transport & unload of Empty Beam of Full Beam or Cloth Roll or Batch up Roll |
| Beam Flange Dia. | 800 mm / 1000 mm / 1100 mm / 1250 mm / 1400 mm |
| Maximum Barrel Dia. | 100 mm / 150 mm / 175 mm / 216 mm / 250 mm |
| Maximum Barrel Length | 2000 mm / 2600 mm / 3200 mm / 3600 mm / 4200 mm / 4600 mm |
| Beam Lifting Operation | Beam lifting / Lowering through Hydraulic operated Foot Pump(with High and Low Pressure Pump Facility) |
| Transportation | Manually Push – Pull |
| Maximum Beam Weight Capacity | 750 kgs. / 1000 kgs. / 1500 kgs. / 2000 kgs. / 2500 kgs. |
| Steering Handle | Both side handle provided on equipment which is positively coupled with each other through worm gear |
| Front Wheel | 50 mm x 150 mm – 2 nos. of Swivel Castor with Cast Nylon wheel complete with metal hub bearing and thread protection disc provided (in case of wider width equipment 40 x 150 mm – 4 nos. wheel are used) |
| Back Wheel / Drive Wheel | 50 mm x 200 mm – 2 nos. of Swivel Castor with Cast Nylong wheel complete with metal hub bearing and thread protection disc provided (in case of wider width equipment 40 x 200 mm – 4 nos. wheel are used.) |
| Structure | Heavy duty M.S. Pipe structure with M.S. Fabricated beam lifting arm provided |
| Lifting Arm Type | Arm Type, beam to be lifted from barrel dia. |