FOR FABRIC SUPPLIER:

With the development of the times, the textile industry has become more and more developed, and there are more and more intelligent machines. The width of the production fabric can reach four meters, six meters or even longer. At this time, the role of fabrics double folding machine is very important, and it can help fabric suppliers to reduce the cost of fabric storage. At present, most of the textile machinery market are double folding machine, but there are also many machinery manufacturers that can provide four-folding machines.

SUNTECH can provide two type double folding machine, one is used to fold the fabric into roll form, the other is used to fold the fabric into the cardboard form.

1. When you want to fold the fabric into roll form, the fabric will be half folded and wound on the paper tube, model ST-DFRM, the running video is at link: https://www.youtube.com/watch?v=GIyKvAmjZzw

 double folding machine 

2. When you want to fold the fabric into cardboard form, the fabric will be half folded and wound on the paper board, model ST-DFLM, the running video is at link: https://www.youtube.com/watch?v=YnXubmY5PtQ&t=7s

SUNTECH also can provide one machine with both options, that means customer can use one machine to fold the fabric into roll form or cardboard form. Model ST-DFM, the running video is at link: https://www.youtube.com/watch?v=gXK_wkzhPW0.

FOR DYEING FINISHING of KNITTED FABRIC:

We know that knitted fabric has a shrinkage problem when doing the dying work. So professional manufacturer will use the relevant machine to achieve the goal of heat setting which refers to the processing technology of heat treatment of synthetic fiber fabric under certain tension to make its size and shape stable. The significance of heat setting is in below points:

Dimensional setting: The thermal stability of the dimension is improved, and the shrinkage rate is reduced

Smooth and shape: Eliminate wrinkles and improve wrinkle resistance

Improve wearing performance: elasticity, feel and pilling are improved

Changes in dyeing properties

In order to make the dyeing effect of knitted fabrics better, the manufacturer will again form the fabric into the shape of tubular fabric and then doing the dying work. At this time, they will need to use a double folding sewing machine.

SUNTECH currently also provides this kind of machine, and uses big international components, such as JUKI sewing machine. The model is ST-DFSM, running video is at link: https://www.youtube.com/watch?v=Qw5uVEPURcg

Whats more, SUNTECH uses a special sewing method - single thread, so that after the knitted fabric being dyed, the tubular fabric can be easily opened for subsequent processing.

We know that most customer will be concerned about the effect of edge alignment when folding the fabric, SUNTECH is a professional manufacturer of machinery with over 50 years of experience, we have special methods to achieve the goal of good edge alignment effect.

FOR FABRIC DOUBLE FOLDING MACHINE:

1. Cloth Guider to make sure the fabric in the center of machine, avoiding the deviation.

2. One set of Edge Alignment Raster will detect the selvedge of fabric, if the fabric is deviated, the sensor will send signal to correct automatically. The edge alignment error is less than 6mm.

FOR DOUBLE FOLDING AND SEWING MACHINE:

1. There is a set of Pneumatic Center Roller will make sure the fabric in the center of the machine, it just like the Cloth Guider.

2. A set of costly center roller to make sure the fabric in the center of the machine again before folding.

3. A pair of edge alignment raster will detect the fabric selvedge of fabrics, if the fabric is in not in correct position. The sensor will send the signal to let machine move left or right to align the fabric edges well. The edge alignment error is the same as fabric folding machine.

If you are interested, and have any requirement on the fabric folding machine~ Welcome to contact us freely.