Nylon, polyester, Lycra are the main fabric types in today’s textile market, SUNTECH launched corresponding fabric slitting machine for sale, is for the cutting process of these fabric types, with ensuring the precise cutting of fabrics. Additionally, if the fabric type is too special to be cut by the normal methods, such as PVC fabrics. SUNTECH’s fabric slitting machine for sale is suitable for PVC fabric cutting.
SUNTECH fabric inspection & slitting machine (ST-FISM) is an indeal machine for handling PVC coated fabrics, artificial leather etc. It can be used for inspecting, slitting and rewinding, with a roll-in-roll inlet and outlet form and the500mm maximum fabric roll diameter.
ST-USCM, ST-FISM, ST-ASCM, ST-MSCM and ST-HSCM are the main 5 fabric slitting machine for sale in SUNTECH, which are different in terms of functions and applicable fabrics. Among them, ST-ASCM is suitable for all type fabrics as well as for leather, artificial leather, felt, carpet,etc.
ST-FISM is more inclined to PVC fabric, and the biggest feature of PVC fabric is that it is easy to wrinkle and it is not easy to wrinkle after wrinkling. For fabrics such as PVC and artificial leather that are prone to wrinkling, cold cutting technology is required.
Main Functions of ST-FISM(fabric slitting machine for sale)
1. End of Fabric Roll Stop Sensor
ST-FISM is the same as the cloth inspection machine, it has end of fabric roll stop sensor. When the sensor detects that the cold cutting of the cloth roll on the machine has ended, the machine will stop. And it will allow for next roll joining, continuously from one piece of fabric to next.
2. Full Width Fabric Inspection
For workers, proper inspection table angle is critical. Workers can observe the specific condition of the fabric by inspecting the table. And fabric inspection&slitting machine(cold cutting) with 30 degree fixed angle inspection screen. This is an appropriate angle determined after adjustment, which facilitates visual inspection of workers and improves production efficiency.
3. Accurate length counting(Y/M).
ST-FISM also has the function of accurate length counting. Workers can preset the value in advance on the digital length counter, and the machine will automatically stop when the length of the cut fabric reaches the value. For example, if you preset the value to 100m, then when the number on the digital length meter reaches 100m, it will stop and its counting errors≤0.1m/km.
4. Consistent roll output.
The machine can achieve roll hardness adjustable and the roll hardness(Loose or Tight) can be adjusted through one hand-wheel.
5. Waste collection after slitting. Unlike other machines, ST-FISM also has the function of slitting. When the fabric is cut, there will be excess fabric, and one of the functions of ST-FISM is to collect the waste fabric.
6. Blade Type and Service Life. The machine has mechanical cutter for selvedge and strip cutting. For cloth cutting machines, the function and service life of the blades are very critical factors. The edge slitting cutter can move right and left within 50cm. The operator need to adjust the distance via the hand wheel, and the cutter will move along the guider rail. For the lifespan of the cutter, it is influenced by the fabric type and using frequency.
If you are worry about how to handling the PVC fabrics in your factory, and need to cut them in aids of cold cutting technology, please pay attention on SUNTECH's fabric slitting machine for sale, which will be the best selection for your business. If you are interested in SUNTECH, you may click to our official site for discovering more!