1. Daily maintenance project
1). Check if the compressed air pressure meets the requirements.
2). Exclude the water in the air source treatment component, and observe the oil level in the oil mister. The oil level should not be added.
3). Clear the dust on the surface of each photoelectric sensor.
4). Clean the exposed surface of the folding machine.
2. Weekly maintenance project
1). For the sprocket, the chain is filled with lubricating oil and adjust the tension of the chain.
2). Make an adjustment to the tightness of the conveyor belt.
3. Monthly maintenance project
1). Add lubricating oil to each conveying roller.
2). Change the oil after the initial operation of the reducer for 300h, and replace it after 1500h.
3). Check the fastening of each joint.